Page 50 - Urban Jungle mode d'emploi_EN_HD

Mount the saddle rails into the inner clamping parts, add the outer parts and re-insert the fixing bolt. If the width of the saddle rails does not fit exactly into the clamp grooves, do not try to force them in. The clamping mechanism or the saddle rails could break and result in an accident and/or injuries to the rider.
Use a different saddle model (f) or contact your URBAN JUNGLE dealer. SAFETY INSTRUCTIONS
When choosing another saddle, observe that there are round and ovalized rails. Replace the fitting pieces of the clamp accordingly.
If the saddle rails fit into the clamp grooves, slide the saddle on the seat post and ensure that the clamp is positioned midway along the total length of the rails. Position the saddle so that its upper surface is parallel to the ground. Tighten the bolt gradually and make sure
1) the clamping device is still accurately mounted on the carbon seat post head and
2) the clamp is tightening evenly around each rail.
Once there is uniform hold on both rails, tighten the bolt gradually with a torque wrench until you have reached the maximum torque value indicated in Newton metres (Nm) on the seat post.
WARNING
Check the bolts by using a torque wrench once a month according to the values indicated directly on the components and/or in the manuals of the component manufacturers.
Poorly tightened or loosening bolts can fail. Risk of accident!
d
e
f
| 50 | ORIGINAL OPERATING INSTRUCTIONS