Page 48 - Urban Jungle mode d'emploi_EN_HD

Adjustment of saddle position and tilt
With patent seat posts (d) one or two bolts fix the clamping mechanism, which controls the
tilt and the horizontal position of the saddle. Some seat posts have two bolts side-by-side.
Release the bolt(s) at the top of the seat post. Release the bolt(s) two to three turns anticlo- ckwise at the most, otherwise the whole assembly can come apart. Move the saddle forth or back, as desired. You may have to give the saddle a light blow to make it move.
Observe the markings on the saddle rail. Make sure the seat of the saddle remains horizontal (e) as you retighten the bolt(s). Your URBAN JUNGLE bike should stand on level ground while you adjust the saddle.
Having found your preferred position, make sure both clamp halves fit snugly around the saddle rails before tightening the bolt(s) to the correct torque value as prescribed by the seat post manufacturer.
Retighten the bolt(s) with a torque wrench according to the manuals of the manufacturer. After fastening the saddle, check whether it resists tilting by bringing your weight to bear on it once with your hands at either end of the saddle (f).
WARNING
Poorly tightened or loosening bolts can fail. Risk of accident!
Check the bolts by using a torque wrench once a month according to the values indicated directly on the components and/or in the manuals of the component manufacturers.
d
e
f
| 48 | ORIGINAL OPERATING INSTRUCTIONS