Page 53 - Urban Jungle mode d'emploi_EN_HD

Check whether the back of your hand forms a straight line with the line of your forearm (a). Retighten the units with a torque wrench and do a twist test! The brake levers need not be absolutely tight. In case of a fall it is an advantage when the brake levers can be turned.
WARNING
Tighten the bolts at the stem until the clamping slots between the stem body and the faceplate are parallel and identical in width at the top and at the bottom. Tighten the bolts evenly and in a cross pattern, i.e. alternately and gradually, to the lower value of the recommended torque values using a torque wrench.
Note that the bolted connections of the stem, handlebars, bar ends and brakes have to be turned to their prescribed torque values. Use a torque wrench and never exceed the maxi- mum torque values! You will find the prescribed values in the chapter «Recommended torque settings for your URBAN JUNGLE bike», directly on the components and/or in the manuals of the component manufacturers.
Bar ends
Bar ends (b) and multi-position handlebars give you additional ways of gripping the handle-
bars.
The bar ends are mounted with a slight upward inclination. Never fix bar ends in vertical position or with their ends pointing rearwards as this would increase the risk of injury in the event of an accident.
WARNING
Be aware that the distance you need to stop your pedelec increases, when you are riding with your hands on bar ends or on multi-position handlebars. The brake levers are not always within easy reach.
SAFETY INSTRUCTIONS
If you want to mount multi-position handlebars or bar ends to the aluminium or carbon handlebars of your URBAN JUNGLE bike, inform yourself in advance whether these components are permitted on your URBAN JUNGLE bike. If necessary, contact your URBAN JUNGLE dealer before mounting.
a
b
c
ORIGINAL OPERATING INSTRUCTIONS | 53 |