Page 34 - Urban Jungle mode d'emploi_EN_HD

WARNING
During use your URBAN JUNGLE bike is undergoing stress resulting from the surface of the road and from the rider’s action. Due to these dynamic loads, the different parts of your bike react with wear and fatigue. Check your URBAN JUNGLE bike regularly, i.e. according to the URBAN JUNGLE service and maintenance schedule, for wear marks, scratches, deformations, colour changes and any indication of cracking. Components which have reached the end of their service life may break without previous warning. Let your URBAN JUNGLE dealer maintain and service your URBAN JUNGLE bike regularly, i.e. according to the URBAN JUNGLE service and maintenance schedule. In cases of doubt it is always best to replace components.
ADDITIONAL INFORMATION «TESTS BEFORE EVERY RIDE» WITH YOUR URBAN JUNGLE PEDELEC
1. Are the connections of the rechargeable battery, the control unit or the command console and the drive (d) correctly plugged?
For more information see the system instructions of your drive manufacturer.
2. Is your battery fully charged? Remember to fully recharge the battery after each longer ride (e.g. less than 50% charged). URBAN JUNGLE uses modern lithium-ion batteries. These have no memory effect. It does not matter, if your URBAN JUNGLE pedelec is left as it is for a short time (e.g. during a break) when less than 50% charged (e). However, you should not wait until the battery is fully discharged!
For more information see the system instructions of your drive manufacturer.
3. Do the display on the control unit (f) and the cycle computer on the handlebars show all the values? Is there any error message or warning on the display? Check the values are correct before every ride. Do not set off on your URBAN JUNGLE pedelec under any circumstances, if the control element shows a warning.
For more information see the system instructions of your drive manufacturer.
d
e
f
| 34 | ORIGINAL OPERATING INSTRUCTIONS