Page 92 - Urban Jungle mode d'emploi_EN_HD

WARNING
If the fabric of the tyre is destroyed by the perforating object, replace the tyre to be on the safe side.
Replace spoilt rim tapes immediately.
NOTICE
If you get a puncture en route, inflate the inner tube and bring it close to your ear. In most cases you can hear the air coming out. At home you can help yourself with a bucket of water where you can locate the hole by the bubbles. When you have found the hole, look for the corresponding place on the tyre and check it, as well. Often, you will find a foreign body sticking in the tyre, which ought to be removed. Otherwise another puncture can occur.
Tyre mounting
When mounting a tyre make sure no foreign matter, such as dirt or sand, gets inside the tyre and you do not damage the inner tube in the process.
Slip one bead of the tyre onto the rim. Using your thumbs, press one bead over the edge of the rim and then around the entire circumference. This should normally be possible without using tools.
Stick the valve of the inner tube through the hole in the rim (e). Inflate the inner tube slightly so that it becomes round and push it into the tyre all the way round (f). Make sure not to leave any folds in the inner tube.
To finish mounting the tyre, start at the opposite side of the valve. Using your thumbs, press as much of the second bead of the tyre over the edge of the rim as you can.
Make sure the inner tube does not get pinched and squashed between the tyre and the rim. You can prevent this by pushing the inner tube into the hollow of the tyre with a finger as you work along.
d
e
f
| 92 | ORIGINAL OPERATING INSTRUCTIONS