Page 68 - Urban Jungle mode d'emploi_EN_HD

WARNING
New brake pads have to be bedded in before they reach their optimal braking perfor- mance. Accelerate your URBAN JUNGLE bike about 30 to 50 times to around 30 kmh and bring it to a halt each time. This procedure is finished, when the force required at the lever for braking has stopped decreasing.
Dirty brake pads and rotors can lead to drastically reduced braking power. Therefore, make sure the brake remains free of oil and other fluids, especially when you clean your URBAN JUNGLE bike or grease the chain (d). Dirty brake pads can under no circumstances be cleaned, they must be replaced! Rotors can be cleaned with special brake cleaners or with warm water and mild soap.
Unusual noises (scratching, chafing etc.) during braking and/or a noticeable change of the braking force (stronger or weaker) are indications that the brake pads are soiled or worn down. Check the brake pads and replace them, if necessary (e). Otherwise you risk further damage, e.g. to the rotor, or even an accident due to brake failure! If you are in doubt, contact your URBAN JUNGLE dealer.
CAUTION
Disc brakes get hot in use. For this reason do not touch the brakes directly after stopping, especially after a long downhill ride.
NOTICE
If your URBAN JUNGLE bike has disc brakes, be sure to mount the safety locks before transporting your bike with the wheels dismounted.
c
d
| 68 | ORIGINAL OPERATING INSTRUCTIONS