Page 100 - Urban Jungle mode d'emploi_EN_HD

SAFETY INSTRUCTIONS
If you want to adjust conventional headsets you will need special tools. If, nevertheless, you want to try it by yourself, read the manual of the headset manufacturer.
THREADLESS HEADSET – AHEADSET®
The distinct feature of this system is that the stem does not sit within the fork steerer tube, but rather slips over the fork steerer tube, which in this case is threadless. The stem is thus an important part of the headset, as the stem clamping fixes the adjustment. You generally only need one or two Allen keys and a torque wrench to adjust an Aheadset®.
Release the clamping bolt(s) located on the side of the stem by one to two turns. Gently tighten the countersunk adjusting bolt on top a little (d), e.g. by a quarter turn, by using an Allen key.
Realign the stem to ensure that the handlebars are at right angle to the wheel. Make sure
the front wheel is in line with the top tube and the stem (e). Tighten the clamping bolts of the stem (f). Use a torque wrench and never exceed the maximum torque values! You will find the prescribed values in the chapter «Recommended torque settings for your URBAN JUNGLE bike», directly on the components and/or in the manuals of the component manufacturer.
Check the headset for play as described above. Do not overtighten the headset. Risk of headset failure!
WARNING
Bear in mind that by overtightening the bolts the stem can crush the steerer tube. In par- ticular forks with carbon steerer tubes are highly sensitive to overtightening the steerer tube clamping at the stem. Risk of breakage! Make sure the clamping area is absolutely free of grease when any of the clamping faces is made of carbon. If necessary, use carbon assembly paste in the clamping areas to ensure maximum clamping.
d
e
f
| 100 | ORIGINAL OPERATING INSTRUCTIONS